Load Cleaning Roller; Install Ribbon Cartridge - DataCard SD260 Installation And User Manual

3.
Load a full roll of print ribbon onto the
spindle closest to the cartridge handle.
4.
Place the empty spool on the spindle
with the black gear.
5.
Wind the empty spool counter-
clockwise one full turn.

Load Cleaning Roller

Load a new cleaning roller with each
new roll of print ribbon.
The printer ships with the cleaning
roller spindle installed on the print
ribbon cartridge.
1.
Remove the cleaning roller
spindle from the ribbon cartridge
and slide the continuous cleaning
sleeve onto the spindle (a).
2.
Snap the spindle with sleeve
installed back onto the ribbon cartridge (b).
3.
Remove the protective wrapper from the cleaning sleeve (c).

Install Ribbon Cartridge

Install the assembled print ribbon
cartridge into the printer.
1.
Hold the print ribbon cartridge by the
handle and lower into the printer
with the handle toward the front of
the printer.
2.
Check to see that the ribbon cartridge
is correctly positioned in the guides.
169