Clean The Multi-Hopper Rollers; Load Cards - DataCard CE870 User Reference Manual

Datacard CE870 User Reference Guide

Clean the Multi-Hopper Rollers

1. Unlock and open the input hopper cover.
2. Load cleaning cards into each hopper.
3. Close the input hopper and lock the printer.
4. Follow the steps on the LCD panel (refer to the following illustration).
5. Press ENTER to start the cleaning process.
12

Load Cards

• Fan the cards to separate the edges.
• Insert ISO magnetic stripe cards with the stripe facing down and to the right.
• Insert smart cards with the chip facing up and toward the back of the hopper.
Note: A diagram inside the hoppers shows the correct orientation for each type of
card.
Single Hopper Printer
1. Unlock the printer and open the input hopper.
2. Load cards into the input hopper.
3. Close the hopper and lock the printer.
Multi-Hopper Printer
1. Unlock the printer and open the multi-hopper door.
2. Load cards into each hopper (H1 through H6). Each hopper holds up to 100
cards.
3. Close the multi-hopper door and lock the printer.
Load Cards
13