Cables Used With The Printer; Data Cable; Power Cable - DataCard SD260 Installation And User Manual

Cables used with the Printer

The printer uses a data cable and a power cable.

Data Cable

The data cable connects the printer to the network or PC sending cards. The data
cable can be:
• USB cable
• Network cable
USB Cable
Use a USB data cable, 6 feet (2 meters) long, to connect the
printer to the PC. Be sure to use a cable rated for USB 2.0
data transmission.
Network Cable
Use a standard network cable, sometimes called a Category 5 or Cat 5 cable, to
connect the printer to a network port.
Smart Card Cable
Use a USB cable up to a maximum of 6 feet (2 meters) long to connect the smart
card port to the PC.

Power Cable

The power cable connects to facility power and the printer power supply. Be sure
to use a cable that grounds to the facility power source.
The printer can use one of the following power cords:
• USA power cable
• European power cable
• Australian power cable
• United Kingdom power cable
• Danish power cable
• Indian power cable
• Israeli power cable
• Italian power cable
• Swiss power cable
146 Supplies and Parts