Control Panel; Name And Function Of Each Component Of The Control Panel - Konica Minolta bizhub 306 Quick Manual

2
2.3

Control Panel

Name and function of each component of the Control Panel

The Control Panel has a Display area that displays messages and hardware keys such as the Start key and
the Clear/Stop key. This section describes the functions of these keys.
No. Name
1 Power Save
2 Utility
3 Display
4 +, ,, *, )
OK
5 Back
6 Error
7 Function
8 Density
9 Quality
10 Zoom
11 Paper
12 AddressBook
13 Mode Memory
14 ID Copy
15 Combine Original
16 Finishing
17 Simplex/Duplex
2-6
Function
Press this key to switch to sleep mode.
In the Utility screen, you can configure the following settings:
Machine setting, paper source setup, custom size memory,
drum dehumidify, admin. management, copy setting 1, copy set-
ting 2, dial registration, fax registration, fax tx operation, fax rx op-
eration, reporting, scan setting, confirm mode.
Displays the number of copies, zoom ratio, Utility screen, icons,
and error messages.
Use the +, ,, *, and ) key to move an option item in the Display
or to change settings.
Press the OK key to determine settings.
Press this key to return to the previous screen.
This lamp lights up or flashes when an error occurs.
Press this key to configure the following advanced copy settings in
the copy function screen:
BOOK SEP., ERASE, OUTER ERASE, NEG. <-->POS., PAGE
MARGIN, STAMP, MIXEDORIGINAL, X/Y ZOOM
Press this key to specify the density with which to scan the original
to be copied.
Press this key to select the image quality of the original from
[TEXT], [PHOTO], and [TEXT/PHOTO].
Press this key to enlarge or reduce an image in copy mode.
Press this key to select a paper tray to be used.
Press this key to display the information registered in the One-
touch Dial, group dial, and speed dial.
Press this key to register or recall the configured copy function.
Press this key to copy the contents of the front and back sides of
a card-size original such as a driver's license, onto one sheet.
Press this key to copy a multi-page original onto one sheet.
Press this key to select the copy finishing mode.
Press this key to use the 1-sided or 2-sided printing function.
Control Panel 2.3
bizhub 306/266