Installing The Bagger Mounting Bracket - Toro 30460 Operator's Manual

1. Link mounting bracket
2. Bolt (3/8 inch)
6
Installing the Bagger Mounting
Bracket
Parts needed for this procedure:
1 Bagger mounting bracket
1 Link
2 Small clevis pin
2 Large clevis pin
2 Small cotter pin
2 Large cotter pin
Procedure
1. Install the link to the link mounting bracket with a
small clevis pin and small cotter pin
Figure 7
3. Flanged locknut (3/8 inch)
(Figure 8).
1. Link mounting bracket
2. Small clevis pin
2. Install the bagger mounting bracket to the bottom of
the machine with 2 large clevis pins and 2 large cotter
pins (Figure 9).
3. Rotate the bagger mounting bracket up and attach it
to the link with a small clevis pin and small cotter pin
(Figure 9).
1. Bagger mounting bracket
2. Small cotter pin
3. Small clevis pin
9
Figure 8
3. Link
4. Small cotter pin
Figure 9
4. Large cotter pin
5. Large clevis pin