Installing The Bagger Mounting Brackets; Installing The Hood Assembly And Bags; Upper Mounting Bracket; Lower Mounting Bracket - Toro 78562 Manual

3
Installing the Bagger Mounting
Brackets
Parts needed for this procedure:
1

Upper mounting bracket

1

Lower mounting bracket

4

Carriage bolt (3/8 x 1-1/4 inches)

2 Carriage bolt (1/2 x 2–1/2 inches)
4

Flange nut (3/8 inch)

2

Flange nut (1/2 inch)

Procedure
1. Install the lower mounting bracket to the machine
frame with 4 carriage bolts (3/8 x 1-1/4 inches) and
4 flange nuts (3/8 inch) as shown in
2. Install the upper mounting bracket to the left and right
side bumpers with 2 carriage bolts (1/2 x 2-1/2 inches)
and 2 flange nuts (1/2 inch) as shown in
1. Carriage bolt (1/2 x 2-1/2
inches)
2. Upper mounting bracket
3. Flange nut (1/2 inch)
Figure 6.
Figure
Figure 6
4. Lower mounting bracket
5. Carriage bolt (3/8 x 1-1/4
inches)
6. Flange nut (3/8 inch)
4
Installing the Hood Assembly
and Bags
Parts needed for this procedure:
1

Hood assembly

2

Bag (48-inch and 52-inch decks)

3

Bag (60-inch and 72-inch decks)

2

Pin and hairpin-cotter assembly

Procedure
1. Position the hood assembly on its back.
2. Slide hooks onto the lower mounting bracket
7).
3. Rotate the hood assembly up on the lower bagger
mounting bracket
4. Align the hole in the bagger with the upper mounting
bracket (Figure
6.
5. Install the pin and secure it with the hairpin cotter on
both sides
7
(Figure 7).
7).
(Figure 7).
(Figure