Performing The Basic Setting Of The Control; Changing The Basic Setting Of The Control - Henny Penny FlexFusion FPE-615 Installation Manual

6.4 Performing the basic setting of the control

6.4.1 Changing the basic setting of the control

INFORMATION
Prerequisite Unit is on
e
Image: Main menu
a Main menu
b FlexiHelp button
c Language selection
By entering the password "2100", the basic setting for the installation
can be displayed and changed.
The basic settings are made in the dialogue.
Advanced settings are made via the parameters for the settings.
The Main menu is displayed
1. Tap the "Unit functions" button.
The Unit functions menu is displayed.
2. Tap the "Unit settings" field.
The PIN window opens.
3. Enter the password.
4. Tap the Confirm button.
The Unit settings menu is displayed.
The basic settings can be changed (see "Unit and connection
data").
5. Fill out the Start-up operation report.
Installation instructions
Connecting the unit
a
d
d "Unit functions" button
e Back button
b
c
35