Fastening The Unit To The Floor; Securing The Unit To Prevent Tipping - Henny Penny FlexFusion FPE-615 Installation Manual

Installing the unit

5.6 Fastening the unit to the floor

5.6.1 Securing the unit to prevent tipping

WARNING
22
6. Level the guide rails.
7. Move tray trolley into the unit until it stops and check the
alignment.
The support rollers of the inserted tray trolley no longer have
floor contact.
8. Remove the push handle.
9. Close the cooking zone door.
10.Fill out the start-up operation report.
Risk of accident from insufficient fastening
Unit can tip over
• Depending on the unit type, suitable measures must be taken to fasten the
unit to the floor.
• Comply with the requirements for the condition of the floor.
• Comply with the requirements for the means of fastening.
• Follow the manufacturer's instructions for using the means of fastening.
Depending on the size, it is essential that certain combisteamer types
or combisteamers used in combination with a Stapelkit (stacking kit), a
recirculation hood, an underframe or base cabinet be secured to
prevent tipping.
Unit types that must be secured to prevent tipping (see "Unit and
connection data").
c
1
b
Image: Arrangement of the floor plates (view from above)
a Cooking chamber door
b Unit leg or underframe
Installation instructions
2
a
c Floor plates
1
2