Installing The Unit On The Unit Legs - Henny Penny FlexFusion FPE-615 Installation Manual

Installing the unit
Prerequisite Unit unpacked

5.3 Installing the unit on the unit legs

Prerequisite The floor must carry the weight of the unit
18
Protective film removed
Unit cleaned
Image: Lifting the unit off the pallet
1. Slide the forks of the pallet truck under the unit and to the right of
the siphon.
2. Lift the unit off the pallet.
1. Lift the unit with the pallet truck.
2. Move the unit to the installation site.
3. Place the unit on the floor.
4. Set up the unit in accordance with the planning drawing (see
"Planning drawing").
Installation instructions