Table of Contents
Advertisement
Connecting the unit
6.4 Making the basic setting of the control
6.4.1 Changing the basic setting of the control
INFORMATION
INFORMATION
Prerequisite Unit is on
34
e
Image: Main menu
a Main menu
b FlexiHelp button
c Language selection
By entering the password "2100", the basic setting for the installation
can be displayed and changed.
The basic settings are made in the dialogue.
Advanced settings are made via the parameters for the settings.
Perform this procedure separately for each unit.
The Main menu is displayed
1. Tap the "Unit functions" button.
The Unit functions menu is displayed.
2. Tap the "Unit settings" field.
The PIN window opens.
3. Enter the password.
4. Tap the Confirm button.
The Unit settings menu is displayed.
The basic settings can be changed (see "Unit and connection
data").
5. Fill out the Start-up operation report.
Installation instructions
a
d
d "Unit functions" button
e Back button
b
c
Advertisement
Table of Contents
