Henny Penny FlexFusion FPE-615 Installation Manual page 26

Installing the unit
Prerequisite Floor capable of accommodating the weight of the unit
26
Floor with steam barrier
In the case of floors with a steam barrier, the floor plates are not
screwed to the floor but fastened with the enclosed adhesive.
Floor must be clean and suitable for the manner fastening
Unit set up and aligned in accordance with the planning drawing
1. Align the floor plates in position 1-1 or 2-2 on the unit leg as
shown in the drawing and mark the floor.
2. Using the adhesive provided, fasten the floor plates to the floor.
Follow the manufacturer's instructions regarding the adhesive.
Apply the adhesive in accordance with the manufacturer's
instructions.
Observe the drying time specified in the manufacturer's
instructions.
3. Complete the start-up operation report.
Installation instructions