Brother HLL3290CDW Service Manual page 71

Error message
First line
Print Unable Turn the power off
C1 and then back on
again.
Print Unable Turn the power off
D1 and then back on
again.
Print Unable Turn the power off
E0 and then back on
again.
Print Unable Turn the power off
E1 and then back on
again.
Print Unable Turn the power off
E5 and then back on
again.
Print Unable Turn the power off
E6 and then back on
again.
Print Unable Turn the power off
E7 and then back on
again.
Print Unable Turn the power off
E9 and then back on
again.
Print Unable Turn the power off
ZC and then back on
again.
Second line
Failed to save data to a USB
flash memory when the USB
DUMP was running.
An error occurred while
initializing the modem.
An error occurred at the ROM
check sum in the firmware.
Program error
An error occurred during access
to the DRAM in the main PCB.
Write error in the EEPROM of
the main PCB
Detected an error in main PCB.
An error occurred while
initializing the NFC.
Detected that supply power is
unstable (less than 100 times).
2-35
Description
Error Refer
codes to:
C100 2-102
D100 2-103
E000 2-104
E100 2-104
E500 2-104
E600 2-104
E701 2-104
E702 2-104
E900 2-104
6F00 2-82
Confidential