Brother HLL3290CDW Service Manual page 70

Error message
First line
Print Unable Turn the power off
0C and then back on
again.
Print Unable Turn the power off
0E and then back on
again.
Print Unable Turn the power off
10 and then back on
again.
Print Unable Turn the power off
1D and then back on
again.
Print Unable Turn the power off
1E and then back on
again.
Print Unable Turn the power off
2E and then back on
again.
Print Unable Turn the power off
38 and then back on
again.
Print Unable Turn the power off
3A and then back on
again.
Print Unable Turn the power off
A7 and then back on
again.
Print Unable Turn the power off
A9 and then back on
again.
Second line
An error occurred in the density
sensor.
An error occurred during the
high-voltage power supply PCB
ID check.
The registration mark sensor R
is dirty and cannot normally
receive reflected light.
The registration mark sensor L
is dirty and cannot normally
receive reflected light.
A communication error occurred
in the LED ASSY (black).
A communication error occurred
in the LED ASSY (yellow).
A communication error occurred
in the LED ASSY (magenta).
A communication error occurred
in the LED ASSY (cyan).
Main PCB and LED control PCB
cannot access each other.
Cannot read/write in the main
PCB and LED control PCB.
Could not communicate with the
cartridge sensor on the machine
side.
Cartridge sensor on the
machine side does not work.
Cartridge sensor version on the
machine side is not available.
A temperature error occurred in
the external temperature/
humidity sensor.
A communication error occurred
between the controller and
engine in main PCB.
Color parameter in the ROM
does not match the first side or
second side CIS.
A scanning error occurred while
processing the scanned image.
2-34
Description
Error Refer
codes to:
0C00 2-66
0E00 2-66
1003 2-67
1004 2-67
1D01 2-68
1D02 2-68
1D03 2-68
1D04 2-68
1E01 2-68
1E02 2-68
2E00 2-71
2E02 2-71
2E04 2-71
3801 2-71
3A00 2-71
A700 2-99
A900 2-99
Confidential