Brother HLL3290CDW Service Manual page 149

■
Paper jam at the manual feed slot
<User Check>
• Check that the paper is set in the manual feed slot correctly.
• Flip over the paper in the manual feed slot or rotate the paper 180°.
• Adjust the paper guide according to the paper size.
• Check that multiple sheets of paper are not set.
• Check that the thickness of the paper is 60 to 163 g/m
Step
Foreign object around the
1
manual feed slot
Registration front actuator
2
coming off
Connection failure of the
3
registration clutch harness
Damaged gears in the paper
4
feed drive unit
5 Paper feed motor failure
6 Damaged fuser unit
7 Main PCB failure
Cause
2-113
2
.
Remedy
Remove the foreign object.
Reattach the registration front actuator.
Reconnect the registration clutch harness.
Replace the paper feed drive unit.
Replace the process drive unit.
Replace the fuser unit.
Replace the main PCB.
Confidential