D027NP001-00
USA/CAN
Version 0
EN
Unpack the machine and check the components
Toner Cartridge and Drum
Unit Assemblies*
(Black, Cyan, Magenta, and
* Installed in the machine
1
Remove the packing materials and re-install the toner cartridge and drum unit assemblies
Remove all the blue packing tape.
Remove the orange parts from each
cartridge.
2
Load paper in the paper tray
3
Connect the power cord and turn the machine on
Back
Quick Setup Guide
HL-L3220CDW / HL-L3240CDW / HL-L3280CDW / HL-L3295CDW / HL-L8245CDW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
Video setup instructions:
support.brother.com/videos
Waste Toner Box*
Yellow)
AC Power Cord
x4
BK
C
M
Y
Location of the power button varies depending on the model.
NOTE:
• Manuals in Spanish for this model are available at support.brother.com.
Manuales en Español para este modelo están disponibles en
support.brother.com.
• The components included in the box may differ depending on your
country.
• The available connection interfaces vary depending on the model.
Belt Unit*
You must purchase the correct interface cable if you require one.
• USB cable
• Network cable
Quick Setup Guide
Product Safety Guide
• The illustrations in this Quick Setup Guide show the HL-L3240CDW.
Push firmly.
Adjust the paper
guides.
NOTE:
Before connecting the power cord, locate the
Serial Number label on the back or side of the
machine. Record this number for Registration
and Warranty support.
Front
The latest manuals are available at the Brother support website:
support.brother.com/manuals
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 6 feet (2 meters) long.
(HL-L3240CDW / HL-L3280CDW / HL-L3295CDW / HL-L8245CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable.
Do not exceed this mark.