Brother HLL3290CDW Service Manual page 429

APPENDIX 3 INSTALLING THE MAINTENANCE
To identify machines connected via USB direct interface, the computer requires the
corresponding driver for the virtual USB device. If you connect any number of machines to
your computer, the same number of virtual USB devices will be automatically configured on
your computer. To prevent many virtual USB devices from being configured, use the unique
driver installation procedure described below that enables your computer to identify terminals
via one single virtual USB device.
Note:
• Once this installation procedure is carried out for a computer, no more driver/software
installation will be required for that computer to identify machines. If the Brother
Maintenance USB Printer driver has been already installed to your computer according to
this procedure, skip this section.
• Before proceeding to the procedure given below, make sure that the Brother Maintenance
USB Printer driver is stored in your computer.
■
Windows 7/Windows 8/Windows 8.1/Windows 10
(1) Check that the AC cord of the machine is unplugged from the electrical outlet. Disconnect
the USB cable that connects the machine with your computer.
(2) Turn ON your computer.
(3) Double-click Setup.exe inside the Brother Maintenance USB Printer folder that was saved
in a temporary folder. The following screen appears. Click the [Next] button.
PRINTER DRIVER
App.3-1 Confidential