Duplex Tray - Brother HLL3290CDW Service Manual

9.37 Duplex tray

(1) Turn the machine upside down.
Note:
• When turning the machine upside down, make sure to lay down the Damper L/R
ASSY to prevent breakage of the Damper L/R ASSY.
(2) Remove the Taptite bind B M4x12 screw to remove the DX drive cover.
(3) Slide the DX input gear Z15 and the DX drive coupling in the direction of the arrow a.
(4) Remove the two Taptite bind B M4x12 screws. Lift the A part of the Duplex tray to remove
it in the direction of arrow b.
Taptite bind
B M4x12
Taptite bind B M4x12
DX drive cover
DX input gear Z15
Assembling Note:
• When assembling the Duplex tray, engage the two B parts with the two grooves of the
machine and slide the Duplex tray in the direction of arrow c, and then insert the C part
into the groove of the DX side chute.
Duplex tray
A part b
<Bottom side>
a
DX drive coupling
B parts
Grooves
Duplex tray
C part
Fig. 3-106
3-118
Groove
c
DX side chute
Confidential