Brother HLL3290CDW Service Manual page 60

Error
Description
Codes
When printing from the MP tray, the
9301 MP paper empty sensor detected that
no paper was in the MP tray.
When printing from the T1, the T1
9302 paper feed sensor detected that no
paper was in the T1.
9303 *1
9304 *1
9305 *1
9306 *1
Detected that there was no paper set in all
9309
trays when TrayAuto was selected for printing.
9501 *1
9502 *1
9503 *1
9504 *1
9505 *1
9601 *1
9608 *1
For 2-sided printing, paper size setting of
9701 the printer driver that was not supported
by 2-sided printing was selected.
When printing from the T1, the size of
9702 paper specified from the driver set the
size which was not supported by the T1.
9703 *1
9704 *1
9705 *1
9706 *1
An error occurred with the value
measured during color density
9801
adjustment performed from the control
panel.
Dot counter or develop roller counter of color toner
9802 has reached the upper limit during color density
adjustment performed from the control panel.
Density patch measurement ended
9803 unsuccessfully during color density
adjustment performed from the control panel.
An error occurred with the value
9804 measured during density sensor
sensitivity calibration.
An error occurred with the value measured
9901 during manual color registration performed
from the control panel.
Dot counter or develop roller counter of color toner
9902 has reached the upper limit during auto color
registration performed from the control panel.
An error occurred during patch data
9903 printing in manual color registration
performed from the control panel.
Refer Error
to: Codes
An error occurred with the value
2-89 9A01 measured during auto color registration
performed from the control panel.
Dot counter or develop roller counter
of color toner has reached the upper
2-90 9A02
limit during auto color registration
performed from the control panel.
An error occurred during patch data
9A03 printing in auto color registration
performed from the control panel.
9B01 *1
9B02 *1
9B03 *1
2-90 9B04 *1
9B05 *1
9B06 *1
9C01 *1
9C02 *1
9C03 *1
9C06 *1
9C07 *1
2-91 9D02 *1
2-91 9D03 *1
9D04 *1
9D05 *1
Image processing was not completed
correctly because the number of pixels
A000
required for image processing is insufficient
in the scanned second side data.
The document scanning position sensor
A200 detected that the document length was 90
cm or more during the one-side scanning.
The document scanning position
sensor has not detected the document
2-91 A300
passing even after the document has
been fed for the specified time.
The ADF cover sensor detected that
2-92 A400
the ADF cover was open.
When scanning the fax, white or black
2-92 A500 correction data for the first side CIS unit was
not within the correct range (first time).
When scanning the fax, white or black
2-92 A600 correction data for the first side CIS unit was
not within the correct range (second time).
Color parameter in the ROM does not
2-93 A700 match the first side or second side
CIS.
2-93 A800 *1
A scanning error occurred while
2-94 A900
processing the scanned image.
2-24
Description
Confidential
Refer
to:
2-95
2-95
2-96
2-96
2-97
2-97
2-98
2-98
2-98
2-99
2-99