Brother HLL3290CDW Service Manual page 69

Error message
First line
Print Data Full Print Data is full.
Press stop and
delete the
previously stored
data.
Print Unable Turn the power off
01 and then back on
again.
Print Unable Turn the power off
02 and then back on
again.
Print Unable Turn the power off
05 and then back on
again.
Print Unable Turn the power off
08 and then back on
again.
Print Unable Turn the power off
09 and then back on
again.
Print Unable Turn the power off
0A and then back on
again.
Print Unable Turn the power off
0B and then back on
again.
Second line
The memory used to store
secure print data exceeded the
memory size for secure print
data.
ASIC error or motor driver error
occurred.
Cannot detect the synchronized
signal of the paper feed motor.
The speed of the paper feed
motor does not stabilize within
the specified time.
Cannot detect the synchronized
signal of the process motor. The
speed of the process motor
does not stabilize within the
specified time.
Detected the fuser unit
temperature error.
An error occurred in the internal
temperature sensor.
Detected irregular power supply
for more than 100 times.
Main PCB detected the fan
failure.
An error occurred in the high-
voltage power supply PCB while
operating.
An error occurred in the high-
voltage power supply PCB
when the machine was in the
ready state.
2-33
Description
Error Refer
codes to:
C800 2-103
0101 2-62
0201 2-62
0202 2-62
0501 2-63
0502 2-63
0503 2-63
0504 2-63
0505 2-63
0506 2-63
050A 2-64
050B 2-64
050C 2-64
0800 2-64
0900 2-65
0A02 2-65
0B01 2-66
0B02 2-66
Confidential