Table of Contents
Advertisement
Installing/mounting
4.2 Sensor installation
Sensors with PFA liner
At delivery the sensor is mounted with blanks to protect the liner during transportation and
storage.
Figure 4-8
• Remove the blanks immediately before mounting the sensor
Figure 4-9
4.2.4
Mounting
• Install the sensor in rigid pipelines in order to support the weight of the meter.
• Center the connecting pipelines axially in order to avoid turbulent flow profiles.
24
Sensor with blanks
Removing blanks
NOTICE
Do not use sharp objects to remove the blanks as this can damage the liner!
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
Advertisement
Table of Contents
