Introduction
1.1
Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
See also
Technical support (Page 122)
1.2
History
The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to each
previous edition.
Edition
03/2021
08/2010
02/2009
02/2008
02/2008
1.3
Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
Remarks
Explanation for ferrite beads, corrections regarding dimensions and EU directives
TRANSMAG 2 Op. Instr.
•
Information on the compact version was removed.
TRANSMAG 2 Op. Instr.
•
Restructering of contents.
TRANSMAG
•
All information concerning Intermag was removed.
TRANSMAG / Intermag
1
7