Siemens SITRANS F TRANSMAG 2 Operating Instructions Manual page 31

Pipe mounting
1. Mount the assembly bracket on the pipe using the fastening brackets
2. Fasten the transmitter with the two screws provided.
Pipe mounting with assembly bracket
Wall mounting
1. Fasten the assembly bracket to the back of the transmitter
2. Fasten the transmitter and assembly bracket to the wall
Note
The fastening brackets and nuts are not needed for wall mounting.
Wall mounting with assembly bracket. Dimensions in mm (inch).
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
Installing/mounting
4.3 Transmitter installation
31