Table of Contents
Advertisement
Installing/mounting
5.1
Basic safety notes
Pressure applications
Danger to personnel, system and environment will result from improper disassembly.
• Never attempt to loosen, remove, or disassemble process connection while vessel contents
Wetted parts unsuitable for the process media
Risk of injury or damage to device.
Hot, toxic and corrosive media could be released if the wetted parts are unsuitable for the
process medium.
• Ensure that the material of the device parts wetted by the process medium is suitable for the
Note
Material compatibility
Siemens can provide you with support concerning selection of parts wetted by process media.
However, you are responsible for the selection of parts. Siemens accepts no liability for faults or
failures resulting from incompatible materials.
Unsuitable connecting parts
Risk of injury or poisoning.
In case of improper mounting, hot, toxic, and corrosive process media could be released at the
connections.
• Ensure that connecting parts (such as flange gaskets and bolts) are suitable for connection
SITRANS TDL
Operating Instructions, 05/2023, A5E51429088_AA
DANGER
are under pressure.
WARNING
medium. Refer to the information in Technical specifications (Page 141).
WARNING
and process media.
5
25
Advertisement
Table of Contents
