Parameters
The device functions and parameters are listed below with the factory setting and setting option.
The menu code only appears in the local display.
Display
Table A-1
Function group display parameters
Menu code Device func‐
tion,
Parameters
1.1
Display Param.
Language
1.1.2
Line 1
1.1.3
Line 2
1.1.4
Display flow
1.1.5
LCD lighting
TRANSMAG 2 with MAG 911/E
Operating Instructions, 03/2021, A5E00102775-AC
Description
Setting parameter for the local display
Language for user guidance
Definition of measured values to be dis‐
played for line 1 in multi-display
Definition of measured values to be dis‐
played for line 2 in multi-display
Selection for type of presentation of the
flow rate (% and bargraph only apply to line
2)
When the "Flow" parameter has been selec‐
ted for lines 1 and 2, "Bargraph in %" is al‐
ways shown in line 2.
Lighting of the display
On: permanently switched on
Off: automatic switch on by pressing key,
switch off after 10 min
Factory setting
Setting options
Deutsch
•
English
•
Deutsch
•
Français
•
Italiano
•
Español
•
Nederlands
Flow
•
Flow
•
Totalizer net
•
Flow velocity
•
Analog Val. 1, 2,
•
Frequency
Totalizer net
•
Flow
•
Totalizer net
•
Flow velocity
•
Analog Val. 1, 2,
•
Frequency
Engineering Unit •
Engineering Unit
•
%
•
Bargraph in %
Off
•
On
•
Off
A
93