Setting Up A Computer For Printing; Netbios Network Connection Method - Canon imageCLASS 2300 Network Manual

Setting Up a Computer for Printing

To set up each of the computers for printing, follow the procedure below.

NetBIOS Network Connection Method

Each computer used for printing must have NetBEUI client software installed. To
check whether NetBEUI client software is installed, follow the procedure below.
1
Right click the [Network Neighborhood] icon on the screen ➞
click [Properties].
2
Check that [NetBEUI] is in [The following network
components are installed].
If [NetBEUI] is not installed, click [Add] to install [NetBEUI].

Setting Up a Computer for Printing

4
4-3