Settings Using Netspot Device Installer - Canon imageCLASS 2300 Network Manual

4
F3
Press [F3] (▼) or [F4] (▲) to highlight <09 VIEW IP ADDRESS>
➞ press [OK].
F4
OK
The VIEW IP ADDRESS menu appears.
F2 5
Press [F2] (▼) or [F3] (▲) to display the setting you want to
check.
F3
Each time you press
DEFAULT GATEWAY, DNS SERVER ADD., HOST NAME, and DOMAIN NAME are
displayed in sequence.
You can return to the NETWORK SETTINGS menu by pressing

Settings Using NetSpot Device Installer

You can install NetSpot Device Installer from the Network User Software CD-ROM
provided with the machine, and use it to specify the protocol settings on the
computer you are using.
For instructions on how to install NetSpot Device Installer and how to specify the
protocol settings using NetSpot Device Installer, see "NetSpot Device Installer," on
p. 5-2.
NOTE
The online instructions on how to install and set protocol settings using NetSpot Device
Installer are found in the Readme file and Online Help, respectively, included on the
Network User Software CD-ROM provided with the machine.
F2 F3
(▼) or (▲), IP ADDRESS, SUBNET MASK,
Preparation for Protocol Settings
2
F4
(OK).
2-11