NetBIOS Network Setup Procedures
To use a NetBIOS network, it is necessary to perform the following procedures.
1
2
4
IMPORTANT
•
It is recommended that the network manager perform Step 1 above.
•
The machine does not support NetBIOS over TCP/IP (NetBT). If you are using a TCP/IP
in your environment, use the TCP/IP protocol for printing. (See Chapter 2, "Using a TCP/
IP Network (Windows/UNIX).")
4-2
NetBIOS Network Setup Procedures
Network Cable Connection (See Chapter 1, "Before You Start Using This
Machine," in the PCL Printer Guide.)
Connect the network cables in accordance with the PCL Printer Guide.
Computer Settings for Printing (See "Setting Up a Computer for Printing," on
p. 4-3.)
Specify the settings for each computer you use for printing.