Settings Using A Web Browser (Remote Ui) - Canon imageCLASS 2300 Network Manual

•
The online instructions on how to install and set protocol settings using NetSpot Device
Installer are found in the Readme file and Online Help, respectively, included in the
NetSpot Device Installer folder on the Network User Software CD-ROM.

Settings Using a Web Browser (Remote UI)

1
2
2-14 Protocol Settings
Start the web browser ➞ enter the URL below in [Location] or
[Address] ➞ press [Enter] on the keyboard.
http://<machine host name or IP address >/
Input Example : http://192.168.203.42/
IMPORTANT
•
For your web browser, use Netscape Navigator/Communicator 4.04 or later, or
Internet Explorer 4.01 SP1 or later.
•
You cannot set this machine's protocol settings through Netscape Communicator
4.08 with Turbolinux 4.0. You have to use a different version web browser.
•
If you are using a connection via a proxy server, use the following settings. (The
settings differ depending on the network environment.)
- When configuring your web browser to use the proxy server, add the IP address
of the machine to Exception (the address not using the proxy server).
•
Set up the web browser to accept cookies.
•
If more than one Remote UI is running at the same time, only the last setting
specified will be valid. It is recommended that only one Remote UI is running.