Canon imageCLASS 2300 Network Manual page 37

6
2
7
8
9
2-18 Protocol Settings
Specify [IP Address], [Subnet Mask], and [Gateway Address].
In [IP Address], enter the machine IP address. In [Subnet Mask] and [Gateway
Address], enter the subnet mask and gateway address used by the TCP/IP
network.
NOTE
If you are using DHCP, BOOTP, or RARP, some of the items above are not used.
The values obtained from DHCP, BOOTP, or RARP are used.
In [LPD Banner], select the type of output for the banner page
(the separator page of each print job).
[Auto]: The banner page is enabled only for print jobs set to output a banner
page, and disabled for print jobs not set to output a banner page.
[On] (final insertion): The banner page is always enabled, regardless of the
banner page output settings. The banner page is output on
the last page.
[Off]: The banner page is always disabled, regardless of the banner page output
settings.
NOTE
Depending on the OS or LPR (Line Printer Remote) being used, it may not be
possible to specify the banner page output settings. If this occurs, you can specify
the settings for banner page output by selecting items other than [Auto].
In [IPP URL] and [Raw Mode Bi-direction], specify the IPP
(Internet Printing Protocol) and Raw settings.
Select [On] or [Off] to enable or disable printing for each mode. Normally, there is
no need to make changes.
If you are using DNS, specify the DNS settings.
❑
Enter the IP address of the DNS server in [DNS Server Address].
❑
Enter the host name of this machine in [DNS Host Name].
Input Example : sales_printer
❑
Enter the domain name belonging to the machine in [DNS Domain Name].
Input Example : sales_dept.xyz_company.co.jp
NOTE
The machine uses DNS when the DNS dynamic update function is used ([DNS
Dynamic Update] is set to 'On' in step 11).