Canon imageCLASS 2300 Network Manual page 57

2
3
2
2-38 Printer Management
Execute the following command.
ftp <machine IP address>
Enter "root" as the user name.
If a password is set for the machine, enter your password. If no password is set,
press [Enter] key on the keyboard without entering a password.
You can perform the following operations:
- Printing a file:
PRINTER
- Resetting the printer network module: get reset
- Acquiring the current setting values:
- Acquiring the default setting values:
- Setting the printer to file values:
- Upgrading firmware:
IMPORTANT
Use the bindery mode for printing of bindery files created with a Windows printer
driver.
NOTE
•
You can log in using a user name other than "root" (blank, etc.). However, you
cannot specify settings. You can only perform operations.
•
You cannot log in as "Anonymous".
put <file name to be printed>
get config
get defaults
put <setting file> CONFIG
put <firmware image file> FLASH