6
Click [OK] to enable the settings.
The printer destination settings are complete.
UNIX
NOTE
Printing using LPD is explained below. For an explanation of the printing procedure using
FTP, see "Printer Management," on p. 2-37.
1
Log in to a workstation as a superuser.
2
Set up the spooling system.
● Example using Solaris 1.x
❑
Add the following to the /etc/printcap file:
<Print queue name>|<comment>:\
:lp=<device special file>:\
:sd=<spool directory>:\
:rm=<machine IP address or host name>:
Input example:
print_queue_name|comments:\
:lp=/var/spool/print_queue_name/.null:\
:sd=/var/spool/print_queue_name:\
:rm=printer_host_name:
● Example using Solaris 2.x
❑
Start the admintool utility.
❑
Select [Browse] ➞ [Printers].
❑
Select [Edit] ➞ [Add. Select Access to Printer].
❑
In [Printer Name], enter the desired print queue name.
❑
In [Print Server], enter the printer host name or IP address.
❑
Click [OK].
Setting Up a Computer for Printing
2
2-31