Table of Contents
Advertisement
Servicing
Semi-Annual
• Lubricate sprockets and chains.
( See Lubrication in this section )
R em ove pow er from the lam inator before
servicing. Y ou can be severely shocked,
electrocuted or cause a fire.
• Check wire termination tightness and molex
connectors.
( Main power, terminal blocks, etc. )
Annually
IN F O R M AT IO N
T his is recom m ended to prolong the life of
the m achine but not required.
• Schedule an overall check up.
( Voltage, wear and tear, etc..... )
Page 1 - 2
E L E C T R IC AL
S H O C K
Titan 165/ 110 Technical Service Manual
1.2 Cleaning the rollers
Tools required
• Protective rubber gloves
( protect your hands from the isopropyl alcohol )
• 80% isopropyl alcohol
( or mild dishwashing detergent and water )
• Rubber cement eraser
( or belt sander dressing block may be used )
• Several 100% cotton terry cloths
( best for lint free cleaning )
U se only isopropyl alcohol or rubber cem ent
eraser to clean the rollers. H arsh chem icals
like toluene, acetone, or M E K can destroy
the silicone covering of the rolls.
Cleaning the rollers
O nly the person cleaning the rollers m ay
control the function of the m achine.
© GBC Films Group October 2000
C AU T IO N
C AU T IO N
Advertisement
Table of Contents
