Table of Contents
Advertisement
Titan 165/ 110 Technical Service Manual
f) Control side only: With a #2 phillips head screw
driver, remove the upper bolt securing the lift plate
spring.
g) Control side only: With a #2 phillips head screw
driver, remove the bolt and washer to the lift plate
guide.
h) Control side only: Use the snap ring pliers to
remove the two snap rings on the main roller and
the two snap rings on the pull rollers.
© GBC Films Group October 2000
i) Remove the main roller and pull roller port plates
using a 4 mm allen wrench.
j) Carefully slide the upper roller roller bearings off.
k) Carefully slide the upper rollers out towards the
control side roller ports.
IN F O R M AT IO N
T he drive side roller bearings are not
secured to the roller journal ends.
Parts changing
Page 3 - 7
Advertisement
Table of Contents
