Table of Contents
Advertisement
Servicing
Footsw itch sp eed is lim ited w h en th e safety
shield is in the raised position or rem oved .
f) Allow the laminator to cool slightly to no higher
o
o
than 110
F ( 43
C ) or cool to the touch.
Use only isopropyl alcohol or rubber cement
eraser to clean the rollers. Harsh chemicals
like toluene, acetone, or MEK can destroy
the silicone covering of the rolls.
g) With the rubber gloves on, clean the rolls
using a moderate amount of 80% isopropyl
alcohol on a cotton terry cloth.
Exercise care when cleaning the laminating
rollers with 80% isopropyl alcohol:
Use only in a well ventilated area
Wear rubber gloves
Use only on cool rolls
C L E A N I N G H E A T E D R O L L E R S C A N
I G N I T E T H E F U M E S !
Page 1 - 4
C A U T IO N
CAUTION
CAUTION
Titan 165/ 110 Technical Service Manual
W A R N IN G
W h en op erating th e lam inator u sin g the
footsw itch, keep hand s and fin gers aw ay
from the nip of the rollers.
Y ou m ay b e C R U S H E D or B U R N E D !
h) For the lower rollers, replace the feed table and
rotate the rollers to an uncleaned area using the
footswitch.
C A U T IO N
Footsw itch sp eed is lim ited w h en th e safety
shield is in the raised position or rem oved .
© GBC Films Group October 2000
Advertisement
Table of Contents
