The following table shows the adjustment items required after fixing or replacing certain parts (units).
Parts
Timing
When the printer is transported without replacing
the cartridge(s).
---
When the color registration seems misaligned.
Controller board After replacing the controller board with a new one. Write USB ID
PWBA MCU
When replacing the PWBA MCU with a new one.
When installing the PWBA MCU once used in other
printer.
*1: Perform Color Registration Alignment (manual) if the misalignment in main-scanning direction is too severe to adjust by Color Registration Alignment (Auto).
ADJUSTMENT
Table 5-1. Adjustment Items
Adjustment Item
Color Registration Alignment (Auto)
*1
Color Registration Alignment (Manual)
EEPROM Data Backup
EEPROM Data Restore
MCU Initialize
Adjustment Items
Procedure
Required Tools or Program
Execute from the control panel.
Execute from the special program. Special program
Execute from the special program. MCU Maintenance Program