Epson AcuLaser C2800 Service Manual page 264

AcuLaser C2800/C2800D/C3800/C3800D
A B C
1)
3)
2)
CLUTCH ASSY PH TURN
1. Loosen the two clamps that secure the harness of the CLUTCH ASSY PH TURN, and detach the
harness.
2. Remove the E-ring that secures the CLUTCH ASSY PH TURN to the FEEDER ASSY.
3. Remove the CLUTCH ASSY PH TURN from the FEEDER ASSY.
DISASSEMBLY/REASSEMBLY
CLUTCH ASSY PH TURN
1)
Kmy03215EA
Disassembly/Reassembly
A B C
4)
3) (Black)
1. Remove the E-ring that secures the shaft of the ROLL ASSY TURN.
2. Remove the BEARING REGI (white) that secures the ROLL ASSY TURN.
3. Remove the BEARING REGI (black) that secures the ROLL ASSY TURN.
Install the white BEARING on the right and the black BEARING on the left as shown in the
figure.
4. Temporarily slide the ROLL ASSY TURN toward left, pull out the right end of the ROLL ASSY
TURN from the CHUTE REGI, and remove the ROLL ASSY TURN.
Revision C
ROLL ASSY TURN
ROLL ASSY TURN
2) (White)
Kmy03218EA
1)
Confidential
264