Epson AcuLaser C2800 Service Manual page 196

AcuLaser C2800/C2800D/C3800/C3800D
A
2)
1)-2
CONTROL PANEL
Be careful not to drop or damage the CONTROL PANEL.
Be sure not to remove the CONTROL PANEL from the COVER FRONT ASSY too far
as they are connected with a harness.
1. Release the two tabs on the CONTROL PANEL, and remove the CONTROL PANEL from the
COVER FRONT ASSY.
2. Disconnect the CONTROL PANEL connector (CN1) and the HARNESS ASSY-CON F terminal.
DISASSEMBLY/REASSEMBLY
CONTROL PANEL
1)-1
1)-1
Kmy03013EA
Disassembly/Reassembly
B C D E
2)
FEEDER ASSY DUP
1)-2
1)-1
1. Pull the lever of the FEEDER ASSY DUP, and raise the FEEDER ASSY DUP straight up.
2. Pull out the two guide pins on the down side of the FEEDER ASSY DUP through the hole on the
COVER ASSY FRONT, and remove the FEEDER ASSY DUP.
Revision C
FEEDER ASSY DUP
Kmy03075EA
196
Confidential