Epson AcuLaser C2800 Service Manual page 233

AcuLaser C2800/C2800D/C3800/C3800D
KIT MOT ASSY PH
12)
12)
12)
12. Remove the three screws (silver, 6 mm) that secure the KIT MOT ASSY PH to the KIT GEAR
ASSY PH.
13. Remove the KIT MOT ASSY PH from the KIT GEAR ASSY PH.
DISASSEMBLY/REASSEMBLY
13)
KIT GEAR ASSY PH
Kmy03086EB
Disassembly/Reassembly
A
Gray
4)
CLUTCH ASSY PH REGI
The mid connector should remain connected to the main unit.
C H E C K
P O I N T
1. Disconnect the connector (P/J233) of the CLUTCH ASSY PH REGI.
Match the colors of the harnesses of the clutches with that of the harnesses of the main unit.
2. Release the harness (gray) of the CLUTCH ASSY PH REGI from the clamp and the tab on the main
unit frame and the clamp on the FEEDER ASSY.
Do not misplace the CLUTCH ASSY PH REGI and the CLUTCH ASSY PH FEED. When
installing the clutches, match the colors of the harnesses and the positioning ribs of the clutches.
Color of the CLUTCH ASSY PH REGI harness is gray.
Color of the CLUTCH ASSY PH FEED harness is yellow.
3. Remove the E-ring that secures the CLUTCH ASSY PH REGI to the FEEDER ASSY.
4. Remove the CLUTCH ASSY PH REGI from the FEEDER ASSY.
Revision C
CLUTCH ASSY PH REGI
Gray
1)
2)
2)
2)
Gray
3)
Kmy03024EB
Confidential
233