Epson AcuLaser C2800 Service Manual page 407

EPSON AcuLaser C2800/C2800D/C3800/C3800D
MAIN CONTROLLER FIRMWARE UPDATE
Procedure
Check the current Print a status sheet, and check the current firmware
1
firmware version version.
Connect the printer to the computer with a USB cable.
Confirm that "Ready" is displayed on the LCD panel.
Connect the printer to the
2
computer
Prepare the firmware data Turn the computer on, copy the firmware data file
3
file (extension: RCC), and save it onto the computer.
4 Start up the printer
Run the Firmware Update Tool.
Select the port and firmware data file on the Firmware
Update Tool window.
5
Prepare to transmit the file
APPENDIX
Method 1
(RCC)
Print a status sheet, and check the current firmware
version.
Turn off both the printer and the computer, and connect
them with a USB cable.
Turn the computer on, copy the firmware data file
(extension: CRB), and save it onto the computer.
Hold down [Start/Stop] + [Cancel Job] + [
printer on. The printer will start up in "Program ROM
update" mode.
---
Run the Firmware Update Tool.
Select the port and firmware data file on the Firmware
Update Tool window.
Firmware Update
Method 2
(CRB)
Before connecting the USB cable, make sure to
disconnect other interface cables from the
product.
] and turn the
Revision C
LCD Panel
---
---
---
Program Device
Version XX.XX
Please Send Data
---
407
Confidential