Epson AcuLaser C2800 Service Manual page 8

A4 full color laser printer
Hide thumbs Also See for AcuLaser C2800:
Table of Contents

Advertisement

Before performing repair and maintenance work, read and
understand the documents of the product (e.g. service manual).
Be sure to follow the specified steps and use the prescribed tools
described in the documents.
When disassembling or assembling the product, make sure to wear
gloves to avoid injury from metal parts with sharp edges.
Take care not to drop any screws, washers, or clips inside the
printer body. Should it fall in, do not boot up your printer until the
part has been safely removed.
After reassembling the printer, make sure all the parts and the
screws are put back in place and the cables are not caught between
metal parts.
Though toner and developer are safe for human body, they may
cause irritation to skin and eyes. If toner gets into your eyes, wash it
away immediately with water. If irritation continues, see a physician.
If toner gets in your mouth, rinse immediately with plenty of water.
If swallowed, induce vomiting and consult a physician.
Do not throw used toner cartridges or toner into the flames.
Do not use vacuum cleaner for home use to clean up spills of
powdered toners. The very fine particles can cause fire/explosion.
Sweep them thoroughly with a broom or wipe them with a cloth
moistened with neutral detergent. If a large amount of toner is
spilled, use a toner vacuum designed specifically to clean toner.
Ozone gas is generated by the printer as a by-product of the
printing process. The amount of gas is too small to be harmful,
however, some users may feel uncomfortable under the following
conditions. It is desirable to advice the users to ventilate the room
when using the printer.
When using the printer for a long period of time in a room with
poor ventilation.
When printing a large amount of documents at a time.
When using multiple printers in the same room.
In order to protect sensitive microprocessors and circuitry, use
static discharge equipment, such as anti-static wrist straps, when
accessing internal components.
The printer is heavy (27.0 kg (59.5 lb.) excluding toner cartridges
including Transfer Unit and Duplex Unit) and must be lifted
horizontally by two or more people.
Do not use thinner or alcohol when cleaning the product as it may
result in discoloration or deformation.
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser c2800dAculaser c3800Aculaser c3800d

Table of Contents