Epson AcuLaser C2800 Service Manual page 205

AcuLaser C2800/C2800D/C3800/C3800D
3)
3)
HARNESS
ASSY-CON F
5)
3. Remove the four screws (silver, self-tapping, 8 mm) that secure the KIT COVER ASSY HARN SEC
to the COVER ASSY FRONT.
Do not separate the KIT COVER ASSY HARN SEC from the COVER ASSY FRONT too
far as they are connected with the HARNESS ASSY FRONT COVER.
4. Remove the KIT COVER ASSY HARN SEC from the COVER ASSY FRONT.
Route the HARNESS ASSY FRONT COVER (black) under the HARNESS ASSY-CON
F (white) in the section indicated with A.
The part of the KIT COVER ASSY HARN SEC indicated with B should be placed
inside of the metal plate of the COVER ASSY FRONT.
5. Remove the HARNESS ASSY-CON F from the COVER ASSY FRONT.
DISASSEMBLY/REASSEMBLY
4)
3)
3)
B
A
Kmy03093EA
Disassembly/Reassembly
C
KIT COVER ASSY FRONT SEC
3)-1
3)-2
1)
3)-1
2)
1. Remove the screw (silver, self-tapping, 10 mm) that secures the HARNESS ASSY FRONT COVER
EARTH2 to the COVER ASSY FRONT.
2. Remove the HARNESS ASSY FRONT COVER EARTH2 from the COVER ASSY FRONT.
3. Release the two tabs that secure the BUTTON TOP to the COVER ASSY FRONT, and remove the
BUTTON TOP and the KIT COVER ASSY FRONT SEC.
Revision C
KIT COVER ASSY FRONT SEC
Kmy03088EA
205
Confidential