Table of Contents
Advertisement
(4) ERROR COUNTER SHIFT
The actual information in the error count list is usually automatically moved to the history side every 1000
communications unless error counter shift is performed. Therefore, this is used to move the information to
the history side before reaching 1000 communications. When error count shift is performed, the count
values on the actual side of the error count list are moved to the history side and the values on the actual
side are initialized. The information having been moved to the history side is added to the previous values.
<Key used in operation>
PROGRAM
*
#
*
*
Select TEST MODE
SET
Select MAINTENANCE
SET
Select ERR COUNTER SHIFT
SET
Select YES
SET
GD-1060 ADJUSTMENT ITEMS
Press the PROGRAM key
Enter SERVICE MODE
Use
and
keys
Use
and
keys
Use
and
keys
Use
and
keys
1 - 96
<Display messages>
PROGRAM
01.DEFAURT SETTINGS
02.LISTS
03.INITIAL SETUP
***SERVICE MODE***
03.INITIAL SETUP
04.MENU MAP
05.TEST MODE
TEST MODE
04.FUNCTION TEST
05.MAINTENANCE
06.SERVICE LIST
MAINTENANCE
02.SET FUNCTION
03.MEMORY WRITE
04.ERR COUNTER SHIFT
ERR COUNTER SHIFT
01.YES
02.NO
ERR COUNTER SHIFT
Operation completed
January 2001 © TOSHIBA TEC
Advertisement
Table of Contents
