Table of Contents
Advertisement
<Remarks>
PC FUNC 6 Bit 7:
Set the function to notify the PC, via PC interface, that the toner has run out, via PC interface.
PC FUNC 6 Bit 6:
Set the function to notify the PC, via PC interface, that the power is turned on, via PC interface.
PC FUNC 6 Bit 5:
Set the function to notify the PC, via PC interface, that a memory full state has occurred.
PC FUNC 6 Bit 4:
Set the function to notify the PC, via PC interface, that the TX cover (DF cover (excluding the platen
cover)) is open.
PC FUNC 6 Bit 3:
Set the function to notify the PC, via PC interface, that the paper detection sensor has detected the
original.
PC FUNC 6 Bit 2:
Set the function to notify the PC, via PC interface, that no paper cassette exists.
PC FUNC 6 Bit 1:
Set the function to notify the PC, via PC interface, that no paper is loaded.
PC FUNC 6 Bit 0:
Set the function to notify the PC, via PC interface, that paper is loaded on the stack feed bypass.
GD-1060 ADJUSTMENT ITEMS
1 - 60
January 2001 © TOSHIBA TEC
Advertisement
Table of Contents
