Table of Contents
Advertisement
Communication conditions
Transmission problem
Reception problem
ECM mode
G3 model
Communication fails with a specific contacted station only (Model name of contacted
station:
In case communication fails with a specific contacted station only, it is also suspected that the
contacted station is at fault or in a busy state (no response) with the memory full without paper.
Check the state of the contacted station.
If the contacted station is found to be without any problems, there is a probability of a commu-
nication problem with a specific model. Check the model name.
Document size:
Reception size
(For NAD model)
LD
(For MJD, AUD, ASD, SAD, TWD, CND model)
A3
Resolution =
Total number of communication sheets =
Line connection state
Directly connected to the public phone line.
Connected to the private branch exchange.
→ Another terminal is connected in addition to this machine.
→ Check if CI is the standard pattern.
(Reception may not be started depending on the pattern of CI.)
Line switching unit
→ Check if the line setting (DP, MF) of the line switching unit matches the line setting of this
machine.
GD-1060 REQUESTED LIST WHEN FIELD PROBLEMS OCCUR
)
LG
LT
ST
A4
A5
B4
STD (8 x 3.85)
Fine (8 x 7.7)
COM
A4
B5
FOLIO
S-Fine (16 x 15.4)
sheets, occurrence of NG with
3 - 10
LT
the sheet
January 2001 © TOSHIBA TEC
Advertisement
Table of Contents
