Table of Contents
Advertisement
2) Quantity of toner pack/process unit to be ordered (1 to 99): ENTER QUANTITY
3) Part number for toner pack/process unit (Max. 20 digits): ENTER PART NUMBER
Enter the part number and the order quantity for the toner pack and the process unit individually.
The procedure and the screen display are the same after selecting 01.TONER/02.DRUM.
<Key used in operation>
A
Select SUPPLIES
SET
Select TONER or DRUM
SET
Select setting item
SET
•
When 01.SELECT AUTO ORDER is selected, the screen prompts you to select 1.YES or 2.NO.
If you do not select 1.YES, the automatic supplies order is not enabled.
•
02.ENTER PART NUMBER is selected to enter the part number for the supplies.
•
03.ENTER QUANTITY is selected to enter the order quantity of the supplies.
January 2001 © TOSHIBA TEC
SUPPLY ORDER
Use
and
keys
01.DESTINATION SETUP
02.SUPPLIES
03.OTHER INFORMATION
Use
and
keys
SELECT SUPPLY ITEM
01.TONER
02.DRUM
Use
and
keys
TONER ORDERING
01.SELECT AUTO ORDER
02.ENTER PART NUMBER
03.ENTER QUANTITY
1 - 109
<Display messages>
A
GD-1060 ADJUSTMENT ITEMS
Advertisement
Table of Contents
