Table of Contents
Advertisement
<Remarks>
UAD 3 Bits 7 and 6:
Sets the allowable gap during dial tome detection when calling through a PABX. In dial tone detection,
even if there are gaps within the time specified in this setting, the counter is not reset and continues to
count the duration of dial tone detection after the dial tone whose frequency is in the specified range
is re-detected.
UAD 3 Bits 5 to 3:
Sets the method to detect the dial tone and line current when calling through a PABX.
• BZT (DTC/LCC)
• LCC 5 sec.
• DTC only
• DTC (USA)
• LCC 3 sec.
• No check
UAD 3 Bits 2 to 0:
Sets the maximum waiting time for dial tone detection when calling through a PABX. If the dial tone is
not detected and redial attempt or internal retry will be performed later.
GD-1060 ADJUSTMENT ITEMS
Performs German BZT type of detection
Only 5 sec. Line current is detection
Only dial tone is detected.
Only dial tone is detected. Duration of detected tone until it is regarded as the
dial tone is fixed 3.3 msec. Even if no dial tone is detected, dialing will be started.
3 second line current detection is performed.
Neither dial tone nor line current is detedted.
1 - 70
January 2001 © TOSHIBA TEC
Advertisement
Table of Contents
