Toshiba GD-1060 Service Handbook page 95

RAM clear table
RAM data
RAM clear mode
[1] [3] [*] and turn ON
[1] [3] [#] and turn ON
[*] [#] and turn ON
[START] [STOP] and
turn ON
[0] [8] and turn ON, then
[6] [6] [5] *1)
[0] [2] and turn ON
1. PIX MEMORY
2. EXCEPT USER MEMORY
3. ALL
(Same as "[1] [3] [*] and turn ON")
4. USER AREA
*1) In case of replacing the main board in the field, you can initializes the parameters
related to copy function stored on the board using this function.
Therefore when this function is performed, it is necessary to readjust the follow-
ing items.
GD-1060 ADJUSTMENT ITEMS
Service
Country
FUNC/
adjustment
setting
SYSFUNC/
data ([0][5])
UAD etc.
area
Set default
value
Set default
value
Set default
value
Set default
Changeable
value
Set default
value
Set default
value
1) Adjustment of paper aligning value
2) Printer unit adjustment
3) Scanner unit adjustment
4) ADF/RADF installation setting
1 - 92
Service parameter setting
Error data
Service Journal
on FAX
setting data report
communi-
([0][8]) area data
cation
Set default
Clear Clear
value *e)
Clear Clear
Set default
value *e)
Set default
value
Set default
Clear Clear
value *e)
Clear Clear
Set default
Clear Clear
value *e)
January 2001 © TOSHIBA TEC
Drum
Protocol Counter
related
trace data
data
data *a)
*b)
Clear
Clear Clear
Clear
Clear
Clear
Clear
Clear
Clear