Table of Contents
Advertisement
1.1.2 Error code list
If an error has occurred during communication, an error code is indicated in the "STATUS" column of the
transmission/reception journal.
Take an appropriate action, referring to the following list.
Code
Maintenance
User
10
10
11
11
12
12
13
13
20
20
30
30
32
32
33
33
42
42
GD-1060 ADJUSTMENT ITEMS
Cause
There was no recording paper or the
paper cassette was not installed dur-
ing the reception.
A recording paper jam occurred dur-
ing the reception.
A document jam occurred.
During the transmission, any cover
was opened and the transmission
stopped.
A power failure occurred during the
transmission or reception, and the
transmission/reception original data
was lost.
The [CLEAR/STOP] key was pressed
during the communication, and the
communication was stopped.
The set number of original pages did
not match the actual pages transmit-
ted.
The polling password did not match,
or no polling document existed.
During a memory transmission or a
memory reception, the machine ran
out of image memory. The machine's
image memory was exhausted.
Supply recording paper and insert the
paper cassette firmly.
Remove the jammed recording paper.
Remove the jammed original, then try
the transmission again.
Attempt the transmission again.
Attempt the transmission or reception
again.
Attempt the transmission or reception
again.
Check the actual original count.
Check the polling password or check if
there is a polling original on the remote
party's side, and attempt the polling re-
ception again.
Divide the originals into several trans-
missions for a memory transmission.
For a memory reception, remove the
cause of the error, then ask the remote
party to transmit the original again.
1 - 2
Remedy
January 2001 © TOSHIBA TEC
Advertisement
Table of Contents
