<Remarks>
PC FUNC 0 Bit 7:
This switch allows or prohibits use of the PC interface.
PC FUNC 0 Bits 6 and 5:
If "00" is selected, the data is not sent to the PC. If "SUB Address" is selected, the data is sent to the
PC only when the sub address is received from the transmitting party. If "All documents" is selected,
all received data are sent to the PC.
PC FUNC 0 Bit 3:
This bit selects whether or not the journal is sent to the PC.
PC FUNC 0 Bit 2:
This switch allows or prohibits any entry or dialing from the PC.
Used in conjunction with PC interface software.
PC FUNC 0 Bit 1:
This switch allows or prohibits any entry from the PC.
PC FUNC 0 Bit 0:
This switch allows or prohibits scanning directed from the PC.
GD-1060 ADJUSTMENT ITEMS
1 - 52
January 2001 © TOSHIBA TEC