Regeneration Test; Recommended Maintenance Plan - Pentair Riversoft Installer Manual

Installer Manual Riversoft - Maintenance

8.1.3. Regeneration test

1. Check condition of brine tank and any associated equipment.
2. Check salt level in brine tank.
3. Initiate regeneration test.
→ Check brine draw during brine draw stage and make sure of proper function.
→ Check brine tank refill and make sure of proper function.
→ Check operation of safety brine valve, where fitted ***.
→ Check for brine draw off levels.
→ Check for resin loss at the drain during regeneration.
→ Where fitted, check for satisfactory operation of solenoid, i.e. outlet shut off during
regeneration and/or brine line shut off valve(s).
4. Test and record Total Hardness of outlet water from softener.
8.2.

Recommended maintenance plan

Items 1 year
Injector &
filter
Refill
controller &
ball **
DLFC & ball **
Aircheck &
balls ***
Bypass
Flappers **
Flappers
spring
Check for
watertightness
O-rings** /clean or
replace in case
of leakage
Motor, motor
cable and
Check
optical sensor
harness
58 / 90
2 year
Clean Clean
Clean Clean
Clean Clean
- -
- -
- -
- -
Check for
watertightness
/clean or
replace in case
of leakage
Check
3 year 4 year
Clean
Clean
Clean
-
-
-
-
Check for Check for
watertightness watertightness
/clean or /clean or
replace in case replace in case
of leakage of leakage
Check Check
Ref. MKT-IM-045 / A - 13.03.2020
5 year
Clean/ replace
Clean
if necessary
Clean/ replace
Clean
if necessary
Clean/ replace
Clean
if necessary
Clean/ replace
-
if necessary
Clean/ replace
-
if necessary
- Replace
- Replace
Check for
watertightness
/clean or
replace in case
of leakage
Replace